AEROGLIDE V2
Aerodynamic Crossbars — Flush Roof Rails. You're standing next to your car with the box open. Here's everything you need.
Watch the Install
Real installer, real car, start to finish. Do this before you touch a screwdriver.
Installation Manual
The essentials, right here on your phone. Full manual link below.
220 lbs (100 kg) dynamic load — never exceed your vehicle's own roof limit, whichever is lower.
Shake every bar before each drive — any movement means stop, re-seat, and re-tighten.
Bow & stern tie-downs to the vehicle frame are required — straps to the crossbars alone aren't enough.
Talk to a Human
Real people, 6 days a week · Mon–Sat, 8AM–12AM EST
Register Your Warranty
AeroGlide V2 is covered by the Erkul Limited Lifetime Warranty — defects in materials & workmanship, original purchaser, proof of purchase required. Registering takes about a minute and speeds up any future claim.
Register My AeroGlide V2Leave a Review
Where did you buy? Takes 30 seconds, helps the next driver decide.
Find your order and tap "Write a review" — it always goes to the exact product you bought.
FAQ
What's special about AeroGlide?+
AeroGlide bars feature an aerodynamic wing-shaped profile with a rubber strip seated in the top groove. Designed for the lowest wind noise in the Erkul lineup.
What's the maximum weight capacity?+
Up to 220 lbs (100 kg) while driving (our dynamic load rating), evenly distributed. Always check your vehicle's roof load limit and never exceed the lower of the two.
Can I install AeroGlide by myself?+
Yes — most users can install with the included Allen key. We recommend reading the manual first and having a second person assist with alignment.
Why is there wind noise when driving?+
Some wind noise is normal with unloaded aerodynamic crossbars — it's airflow over the wing profile. If excessive, check alignment, ensure end caps are present, or add a wind fairing.
Are the bars lockable?+
Yes. Each mount has a lock cover with a metal key. Always lock after installation.