WIZARD V1
Extended-Bar Crossbars — Raised Roof Rails. You're standing next to your car with the box open. Here's everything you need.
Watch the Install
Real installer, real car, start to finish. Do this before you touch a screwdriver.
Installation Manual
The essentials, right here on your phone. Full manual link below.
165 lbs (75 kg) dynamic load — never exceed your vehicle's own roof limit, whichever is lower.
Shake every bar before each drive — any movement means stop, re-seat, and re-tighten.
Bow & stern tie-downs to the vehicle frame are required — straps to the crossbars alone aren't enough.
Talk to a Human
Real people, 6 days a week · Mon–Sat, 8AM–12AM EST
Register Your Warranty
Wizard V1 is covered by the Erkul Limited Lifetime Warranty — defects in materials & workmanship, original purchaser, proof of purchase required. Registering takes about a minute and speeds up any future claim.
Register My Wizard V1Leave a Review
Where did you buy? Takes 30 seconds, helps the next driver decide.
Find your order and tap "Write a review" — it always goes to the exact product you bought.
FAQ
Why do I need to cut the bottom rubber strips?+
Wizard is designed for vehicles with variable bar spacing. The bottom long rubber strips (H) protect the bar's bottom groove — the track the mount claws grip — and must be cut to match your specific bar length between mounts. The top strip (E) needs no cutting.
What if I cut the rubber too short?+
Contact support@erkulautousa.com immediately. Replacement strips are available — keep the offcut to verify the correct length needed.
Can I attach accessories to the bars?+
Yes — the bar's T-slot track accepts standard T-bolt accessories (cargo boxes, kayak racks, bike mounts). The T-bolts come with those accessories; they are not included with the crossbars.
Can I install Wizard by myself?+
Yes — most users can install with the included Allen key. We recommend reading the manual first and having a second person assist with alignment.
Are the lock covers lockable?+
Yes. Each mount has a lock cover (J) locked with a metal key (K). Lock after installation for theft deterrence. The plastic keys (L) are separate — they open the profile end caps on the bar tips.